favorite
favorite
hide
unhide
flag

Posted

print

350 - $995 (Duluth)

350 1 thumbnail350 2 thumbnail350 3 thumbnail
4492 W. LISMORE RD near Rice Lake Rd

google map

condition: good
350 Chevy Hi performance motor.
Best for circular track or bracket racing.
.030 Over bored with flat top pistons.
4 bolt mains with cast crankshaft
Weiand X - Celerator intake manifold rated 2500 to 6500 rpm.
Isky 280 Hydraulic MegaCam for high performance use in racing.
Advertised duration 280 degrees both intake and exhaust
Valve lift 0.485" both
Lobe separation 108 degrees
RPM range 2500-6800
2500 rpm stall converter recommended
3.90 to 4.11 axle ratio
I bought the car at auction without documentation. The car has 3.08 gears which were not good for this motor.
I have changed motors in my car and this is for sale. It does not have a carb to go with it.
It has very good compression but smokes when you start it. I'm sure it needs new valve stem seals.
I also have a new flywheel available if you have a 4 spd car it will go into.
Has a good HEI distributor but no wires. Also a large aftermarket oil pan.
I would not recommend it for street use set up the way it is.

I encourage phone calls and not emails or texts. I am a senior and don't like scams, so don't try.

Cash only no trades, will consider reasonable offers. Don't bother low balling me.

post id: 7747351318

posted:

best of [?]

loading
reading
writing
saving
searching